Technology - WELLFAR

2026-08-27 02:18 2026-08-27 02:18

Engine Bearing Failure Models. Failure Analysis – Bent Or Twisted Connecting Rod

Excessive wear areas can be seen on opposite ends of the upper and lower connecting rod bearing shells.

2026-08-25 03:06 2026-08-25 03:06

Engine Bearing Failure Models. Failure Analysis – Excessive Crush

Extreme wear areas visible along the bearing surface adjacent to one or both of the parting line.

2026-08-20 06:05 2026-08-20 06:05

Engine Bearing Failure Models. Failure Analysis – Shifted Bearing Cap

Excessive wear areas can be seen near the parting lines on opposite sides of the upper and lower bearing shells.

2026-08-13 02:42 2026-08-13 02:42

Cummins Serial Numbers And Dataplates

Ordering the right diesel parts starts with one simple step: read the engine dataplate.

2026-07-30 03:26 2026-07-30 03:26

12-Valve VS 24-Valve 6BT

Cummins 5.9L 6BT: 12-Valve vs 24-Valve — What Parts Buyers Need to Know

2026-07-27 03:24 2026-07-27 03:24

Cummins_6BT_Basics

The Cummins 6BT is one of the most trusted diesel engines in the world.

2026-07-23 05:19 2026-07-23 05:19

The Cummins B-Series Family 3.9L, 5.9L, And 6.7L

Many diesel parts buyers ask about the 4B, 6B, and 6.7L — three engines that all belong to Cummins’ "B-Series" family.

2026-07-21 05:46 2026-07-21 05:46

Cummins 4BT Repower Small Engine, Big Reasons To Choose It

A repower means removing an old engine and installing a different one.

2026-06-26 05:50 2026-06-26 05:50

Engine Bearing Failure Models. Failure Analysis – Mis assembly

Engine bearings will not function properly if they are installed wrong. In many cases, mis assembly will result in premature failure of the bearing.

2026-06-24 06:06 2026-06-24 06:06

Engine Bearing Failure Models. Failure Analysis – Foreign Particles On Bearing Back

A localized area of wear can be seen on the bearing surface.

2026-06-22 06:01 2026-06-22 06:01

Engine Bearing Failure Models. Failure analysis – Foreign particles in lining

Foreign particles are embedded in the lining of the bearing. Scratch marks may also be visible on the bearing surface.

2026-06-18 05:30 2026-06-18 05:30

Engine Bearing Failure Models - Types / causes of bearing failure / damage

Engine Bearing Failure Models

2026-06-12 02:42 2026-06-12 02:42

Benefit Of Cylinder Head Gasket Coating And Main Manufacture And Related Standard

Cylinder head gasket coatings play a critical role in modern diesel and gasoline engines

2026-05-29 02:20 2026-05-29 02:20

MLS Gasket Failure Mode Analysis

This is the most common failure mode, characterized by erosion or burn-through near the combustion sealing ring.

2026-05-27 05:31 2026-05-27 05:31

2027 Cummins X15 Engine Introduction

The unveiling of the 2027 Cummins X15 signals a major engineering pivot to meet the stringent EPA 2027 standards.

2026-05-25 05:05 2026-05-25 05:05

Diesel Engine Cylinder Head Manufactue Process Design Concept

The concept focuses on creating a rigid, monolithic structure capable of housing the valvetrain and fuel injection system while maintaining a perfect seal against the engine block.

2026-05-14 06:18 2026-05-14 06:18

Why HD Diesel Engine Piston Pin Bore Has Sleeve Installed

In high-output heavy-duty (HD) diesel engines, the piston pin bore is a primary stress point.

2026-04-30 01:47 2026-04-30 01:47

HD Diesel Engine Welded Steel Piston Advantages And Disadvantages

Welded steel pistons are increasingly adopted in heavy-duty (HD) diesel engines, particularly for high peak firing pressure (PFP) applications.

2026-04-27 06:01 2026-04-27 06:01

Pros And Cons Of HD Diesel Engine Aluminum Piston

Aluminum pistons are widely used in heavy-duty (HD) diesel engines due to their favorable balance of thermal, mechanical, and manufacturing characteristics.

2026-04-16 05:35 2026-04-16 05:35

Disel Engine First Piston Ring Failure Mode Analysis

The first piston ring in a diesel engine operates under the most severe thermal and mechanical conditions, making it highly susceptible to multiple failure modes.